Skip to main content

How To Measure For Blinds And Shades | Step-by-Step Guide

How To Measure For Blinds And Shades Step-by-Step Guide

Measuring for blinds means recording the width and height of your window in three spots each, then using the smallest width and largest height for an inside mount, or adding a few extra inches on each side for an outside mount. Getting these numbers right the first time is what makes the difference between a blind that fits perfectly and one that leaves gaps or does not close all the way.

A window rarely stays perfectly square over time, since frames can shift slightly due to age, weather, or the natural settling of a house. This is why accurate window measurements for blinds and shades are essential for getting the right fit. This guide from Superior Blinds walks you through every step, from choosing the right inside or outside mount to measuring odd-shaped windows, doors, and multiple windows on one wall, so you can choose the correct blind size with confidence and avoid a costly return.

Why Accurate Blind Measurements Matter

A window is rarely a perfect rectangle. The frame can shift slightly over time due to age, weather, or how the house settles. Because of this, even a small measuring mistake can lead to a blind that does not fit right.

Blinds that are too wide will not fit inside the frame at all. Blinds that are too narrow will leave gaps that let light in and reduce privacy. Taking a few extra minutes to measure carefully saves you time, money, and the hassle of sending a blind back.

Common Problems Caused by Incorrect Measurements

Here are the most common issues that happen when a window is measured incorrectly.

  • The blind is too wide to fit inside the window frame
  • The blind is too short and does not cover the full window
  • Light gaps appear on the sides of the blind
  • The blind does not close all the way
  • The mounting brackets do not line up with the frame

Tools You Will Need Before You Start Measuring

Tools for measuring windows for blinds and shades

You do not need special equipment to measure for blinds. Most of these items are already in your home.

  • A steel tape measure
  • A pencil and paper, or your phone, to write down numbers
  • A step stool if your window is tall
  • A helper, if you have one, to hold the tape measure steady
  • A level, if you plan to mark a headrail position for an outside mount

A simple printable worksheet with labeled boxes for width, height, and depth can also help keep your numbers organized, especially if you are measuring more than one window. You can sketch a basic version on paper with columns for each measurement type.

Steel Tape Measure vs Cloth Tape Measure

A steel tape measure is the better choice for this job. Steel does not stretch or bend, so your numbers stay accurate. A cloth tape measure can sag or stretch slightly, which throws off your measurement by a small amount. That small amount can be enough to cause a poor fit, so it is best to avoid cloth tape for this task.

Inside Mount vs Outside Mount: Which Should You Choose

Before you measure, you need to decide where the blind will sit. This choice changes how you measure, so it is the first thing to figure out.

Feature Inside Mount Outside Mount
Where it sits Inside the window frame On the wall or trim above the window
Look Clean and built in More visible, can hide an uneven frame
Light gaps Small gaps possible on the sides Very few light gaps
Best for Windows with enough frame depth Shallow frames or windows you want to appear larger

What Is an Inside Mount

An inside mount means the blind fits inside the window frame, so the front of the blind sits flush with the wall around it. This gives a neat, built in look and works well when you want to show off trim or molding around the window.

What Is an Outside Mount

An outside mount means the blind is mounted on the wall or trim above the window opening, rather than inside it. The blind covers the entire window opening and some of the wall around it. This option works well if your window frame is too shallow for an inside mount, or if you want better light control.

How to Decide Between Inside and Outside Mount

In most cases, the depth of your window frame decides this for you. If the frame is deep enough to hold the blind hardware, an inside mount usually gives the cleanest look. If the frame is too shallow, or if you want to block out more light, an outside mount is the better choice.

How to Check If Your Window Has Enough Depth for an Inside Mount

Before measuring width and height, check the depth of your window frame. Most blinds need at least one inch of depth, though this can vary by product, so it is worth checking the specific requirement for the blind you plan to buy.

  1. Place your tape measure at the front edge of the window frame
  2. Measure back to the window glass
  3. Write down this number in inches
  4. Compare it to the depth requirement listed for your chosen blind

If your frame is not deep enough, plan for an outside mount instead.

Checking for Handles, Locks, and Other Obstructions

Before you finalize your measurements, take a moment to look for anything that might get in the way of the blind opening or closing smoothly. This step is easy to skip, but it can prevent a frustrating problem after installation.

  • Look for window cranks, handles, or locks that stick out into the frame
  • Check for thick molding or trim that could block an inside mount
  • Note any alarm sensors or wires attached near the top or sides of the window
  • For an outside mount, check that light switches or outlets nearby will not interfere with the mounting brackets

If you find an obstruction, you may need to adjust to an outside mount, or choose a bracket style that sits further out from the frame.

Choosing Between Corded, Cordless, and Motorized Options Before You Measure

The way a blind operates can affect how much space it needs at the top of the window, so it helps to decide on this before you finalize your measurements. A corded blind uses a pull cord or wand to open and close. A cordless blind uses a spring mechanism built into the headrail, which can sometimes require slightly more depth. A motorized blind uses a small motor inside the headrail, which usually needs the most space of the three options.

If you already know which lift type you want, check the headrail depth listed for that option before you confirm your window depth measurement.

How to Measure for Blinds Inside Mount

This section covers how to measure for blinds inside mount, step by step. Follow these steps in order for the most accurate result, and write down every number as you go so nothing gets mixed up later.

Step 1: Measure the Width at the Top, Middle, and Bottom

Measure blind width for inside mount

The width of a window opening is rarely the exact same all the way down, especially in older homes where the frame may have shifted slightly. Measuring in three spots helps you catch these small differences before they cause a fit problem.

  • Hold your tape measure flat against the inside of the frame at the very top of the opening and record the number
  • Move to the middle of the window and measure the width the same way
  • Measure the bottom of the window opening using the same method
  • Write down all three numbers clearly, labeled as top, middle, and bottom, so you do not confuse them later

Step 2: Measure the Height at the Left, Middle, and Right

Measure blind height for inside mount

Just like width, the height of a window can vary slightly from one side to the other. Measuring at three points along the height gives you a more accurate picture of the true window size.

  • Measure from the top of the frame straight down to the sill on the left side of the window
  • Repeat this same measurement down the center of the window
  • Measure the height again on the right side of the window opening
  • Record all three height numbers separately so you can compare them once you are done

Step 3: Measure the Depth of the Window Frame

Measure window depth for inside mount blinds

Depth tells you whether your window frame can actually hold the blind hardware for an inside mount. Skipping this step is one of the most common reasons an inside mount does not work out.

  • Place your tape measure at the front edge of the frame, right where the trim begins
  • Measure straight back until you reach the window glass
  • Check this number in at least two spots along the frame, since depth can vary slightly too
  • Compare your depth measurement to the minimum depth listed for the blind you plan to buy

Why You Always Use the Narrowest Width and Longest Height

For an inside mount, always use the smallest of your three width numbers and the largest of your three height numbers. This might seem backward, but it makes sense once you think it through.

  • The narrowest width keeps the blind from being too wide to fit anywhere along the frame
  • The longest height makes sure the blind reaches the sill at every point, even where the frame is slightly uneven
  • Using the widest width instead can cause the blind to jam or not fit into the frame at all
  • Using the shortest height instead can leave a gap at the bottom of the window in certain spots

How to Measure for Blinds Outside Mount

An outside mount measurement works a little differently, since you are covering the full window opening plus some extra space around it rather than fitting inside the frame itself.

Step 1: Mark Your Headrail Position

Mark headrail position for outside mount blinds

The headrail is the top bar of the blind that holds everything in place, and its position determines where every other measurement starts from. Getting this mark right first makes the rest of the process much easier.

  • Decide how far above the window opening you want the blind to sit, usually about two to three inches
  • Use a level to make sure your mark is straight across the top of the window
  • Mark this spot lightly with a pencil on both the left and right sides of the window
  • Double check that both marks are the exact same height before moving forward

Step 2: Measure the Width and Add Overlap

Measure blind width for outside mount

Overlap is the extra width added on each side of the window to help block light from sneaking around the edges of the blind. This step is what makes an outside mount block more light than an inside mount.

  • Measure the full width of the window opening from outer edge to outer edge
  • Add about three to four inches total to this number, split evenly between both sides
  • Add more overlap on each side if the room needs extra darkness, such as a bedroom
  • Write down your final width number, including the added overlap, so you order the correct size

Step 3: Measure the Height and Add Allowance

Measure blind height for outside mount

The height for an outside mount starts at your headrail mark rather than the top of the window frame, so this measurement covers more than just the window opening itself.

  • Measure straight down from your headrail mark to where you want the bottom of the blind to end
  • Aim for the bottom of the blind to reach at or slightly below the windowsill
  • Add a couple of extra inches if you want more coverage for better light control
  • Record this final height number along with your width so both are ready when you order

Leaving Room for Stack Height and Clearance

Stack height is the space a roller blind takes up at the top of the window once it is fully raised. Roller shades, cellular shades, and fabric blinds all need a certain amount of clearance above the window opening so the raised fabric or slats do not block your view or get in the way.

  • Check the stack height listed for your chosen blind style before finalizing your outside mount height
  • Leave at least a few extra inches above the window opening for thicker fabrics like cellular shades
  • For an inside mount, confirm the frame depth can hold the stacked fabric along with the headrail
  • If your window sits close to the ceiling, consider an inside mount or a low profile headrail to avoid clearance issues

How to Measure for Different Window Treatments

How to Measure for Different Window Treatments

Not every window covering is measured the exact same way. Here is how the process changes depending on what you are installing.

How to Measure for Blinds Inside Recess

A recess is simply the built in space around a window, and measuring for blinds inside recess follows the same steps as a regular inside mount. Measure the width at three points and the height at three points, then use the narrowest width and longest height.

How to Measure for Roman Shades

Roman Blinds hang flat when open and fold into soft layers when closed. For an inside mount, measure the width and height the same way you would for blinds. For an outside mount, most manufacturers recommend adding slightly more overlap on Roman shades than on standard blinds, so check your specific product’s guidelines.

How to Measure for Cellular Shades

Cellular shades, sometimes called honeycomb shades, use a similar measuring process to blinds. Because these shades often sit very close to the glass, it helps to double check your frame depth before choosing an inside mount, and to account for extra stack height since the folded fabric can be thicker than a standard blind.

How to Measure Windows for Vertical Blinds

Vertical blinds hang from a track at the top of the window instead of the sides. Measure the width along the top of the window opening only, and measure the height from the top of the opening down to the sill or floor, depending on how far you want the blinds to hang.

How to Measure for Bay Windows, French Doors, and Sliding Doors

Measure bay windows, French doors and sliding doors

Some windows and doors need a slightly different approach than a standard rectangular window. Here is how to handle a few common shapes and setups.

Bay windows are made up of two or more window panels set at angles to each other. Measure each panel separately from corner to corner, since the angles mean each section is its own size. Treat each panel as its own window with its own width and height measurements, especially if you plan to install panel blinds across the bay window.

French doors usually need an outside mount so the blind does not interfere with the door handle or hinges. Measure the full width of the door frame and add enough overlap on each side to cover the opening, then check that the blind will not block the door from opening and closing freely.

Sliding glass doors are often wider than a standard window, so measure the full width of the opening and consider whether you want a vertical blind, which is a common choice for this shape. Measure the height from the top of the frame down to the floor or track, depending on the door style.

How to Measure Windows on the Same Wall

If you have two or more windows next to each other, measure each one on its own, since window sizes can differ slightly even when they look the same. Once you have all your numbers, compare them and decide whether you want the blinds to look evenly spaced when they are lowered. Many people choose to line up the bottom edge of each blind at the same height across the wall, even if the windows themselves are slightly different sizes, for a cleaner overall look.

How to Measure an Irregular or Uneven Window

Some windows are not perfectly square, especially in older homes. To check if your window is square, measure the two diagonal lines from corner to corner. If both diagonal measurements match, your window is square. If they do not match, your window is out of square, and you may need a custom shape or extra adjustment when ordering.

For an out of square window, always use the smallest width and the largest height measurements to make sure the blind still fits properly.

Common Width and Length Deductions Explained

Manufacturers often ask you to send the exact window measurement, then they apply a small deduction automatically to help the blind fit properly. This deduction typically ranges from one quarter inch to three eighths of an inch off the width for an inside mount. This gap allows room for the blind to tilt, open, and close without rubbing against the frame. Deduction amounts can vary by manufacturer, so it is a good idea to confirm this detail before placing your order.

How to Measure Windows for Blinds Using Your Phone

Many smartphones now include a built in measuring tool that uses the camera to estimate distance. This can work as a helpful backup, but it is not as accurate as a steel tape measure. If you use your phone to measure, double check the number with a tape measure before ordering, especially for the width, since even a small error can affect the fit.

Window Treatment Measurements: Common Sizes and Recommended Blind Widths

Standard window sizes can give you a general idea of what to expect, though every window should still be measured individually.

Window Width Typical Blind Width Needed
24 inches 23.5 to 23.75 inches
30 inches 29.5 to 29.75 inches
35 inches 34.5 to 34.75 inches
48 inches 47.5 to 47.75 inches
60 inches 59.5 to 59.75 inches

These numbers assume an inside mount with a standard deduction applied. Always confirm the exact deduction used by your chosen manufacturer.

Common Mistakes to Avoid When Measuring for Blinds

  • Using a cloth tape measure instead of a steel one
  • Measuring only once instead of at three points along the width and height
  • Using the widest width instead of the narrowest for an inside mount
  • Forgetting to check the window depth before choosing an inside mount
  • Mixing up width and height when writing down numbers
  • Skipping the diagonal check on older or uneven windows
  • Forgetting to leave room for stack height when the blind is fully raised
  • Not checking for handles or locks that could block the blind from closing

What to Do After You Finish Measuring

Once you have your final numbers, write them down clearly with labels so you do not mix them up later. Double check your measurements against the manufacturer’s instructions, since some brands calculate deductions differently. If you are ordering more than one blind, measure and label each window separately, since sizes can vary from room to room even in the same house.

Frequently Asked Questions

Q1. What Size Blinds Do I Need for a 35 Inch Window

For a 35 inch window with an inside mount, you generally need a blind that is about a quarter inch to three eighths of an inch narrower than 35 inches, so around 34.5 to 34.75 inches. This deduction gives the blind room to open and close without rubbing against the frame.

Q2. How Much Space Should Be on Each Side of a Window Blind

For an inside mount, the gap is usually small, around one eighth to three sixteenths of an inch per side, which comes from the standard deduction. For an outside mount, most people add one and a half to two inches of overlap on each side to block out extra light.

Q3. Can I Measure My Windows for Blinds Using My Phone

Yes, many phones have a built in measuring tool that can give you a rough estimate. However, it is best to confirm the final number with a steel tape measure, since phone measurements are not always precise enough for a proper fit.

Q4. What Is the Most Popular Blind Size

There is no single most popular size, since window sizes vary widely by home and room. However, standard windows often fall between 24 and 48 inches wide, which is why many ready made blinds are sold in that range.

Q5. How Do I Measure a Window That Is Not Square

Measure both diagonal lines of the window from corner to corner. If the two numbers are different, your window is out of square. In that case, use the smallest width and the largest height when ordering to make sure the blind still fits.

Q6. Should I Round Up or Down When Measuring for Blinds

For an inside mount, always round down to the nearest eighth of an inch. Rounding up can make the blind too wide to fit inside the frame, while rounding down leaves a small safety margin.

Conclusion

Measuring for blinds does not need to feel complicated once you break it down into small steps. The process really comes down to a few key habits: measure your window in three spots for both width and height, decide early whether you want an inside mount or an outside mount, and always double check your numbers before placing an order.

A few extra minutes with a tape measure can save you from a blind that does not fit, along with the time and hassle of sending it back. Whether you are working with a deep window frame, an uneven opening, a bay window, or a sliding door, the same basic rules apply. Measure carefully, write down every number, and confirm your details against the specific product you plan to order, since small differences between manufacturers can affect the final fit.

Related Blogs